| |
| CNC TURNING LATHE |
 |
|
 |
Designed to enhance high efficiency machining.
The Kuen Jeng KS-32 Sliding Head & Fixed Head Com-pound CNC Lathe combines various tool slides, main spindle, sub-spindle and rotating tools in one machine.
With such a machine construction, turning, drilling, tapping and side milling can be quickly performed.
For complicated small parts machining the Kuen Jeng KS-32 is your best choice. |
Now, with the additional Y2-axis,back milling on a part becomes easier.
KS-32S is with the function of Sliding Head&Fixed Head, and its main feature is the additional Y2 axis. The Y2 axis allows the rear side machining device to be moved up and down to strengthen turning & milling processing of workpieces’ reverse side. Moreover, we have chosen Fanuc controller with double control system (X1,Z1,Y1,C1,A1 and X2,Z2,Y2,C2,B2) for machining simultaneously.
|
|
 |
- ‧Max. turning diameter 32 mm.
- ‧Max. turning length 300 mm.
- ‧Sliding head & fixed head compound design.
- ‧Equipped with a rotary guide bushing for increasing
stability when machining long workpieces.
- ‧Main and sub-spindle.
- ‧Main and sub-spindle prossess C-axis function.
- ‧Standard equipment includes 4 sets of tool slides. Upon
request, one additional set of front and rear machining
powered tool slides is available (optional).
- ‧Automatic bar feeder (optional).
- ‧Fanuc controller with 10.4” LCD monitor.
|
|
| |
※Notice :
1.To keep improving and developing new functions, Kuen Jeng reserves the rights to change specifications without notice.
2.Due to varying cutting conditions, actual results may be greater or less than those listed.
|
|
|
| |
- ‧The spindle head moves on two linear ways with a large span
design to achieve maximum stability
and smoothness.
- ‧The spindle head movement is driven by a servo motor for highly accurate positioning.
- ‧A high precision spindle permits accurate machining and allows
continuous, long time operations.
|
| |
|
|
|
|
|
| Collet Chucking System(DIN 6343-35) |
 |
The machine adopts a collet type spindle, maximum clamping
diameter is Ø32 mm, maximum clamping length is 300 mm. |
| |
|
|
|
|
| Automatic Bar Feeder (optional) |
 |
The machine is equipped with an automatic bar feeder that
allows the machine to perform fully automatic operations. This
results in labor-saving, increased efficiency and productivity.
|
| |
|
|
|
|
| C-axis Contouring Function |
 |
- ‧Both main and sub-spindle feature C-axis functions,
allowing for contourmachining.
- ‧Indexing accuracy for main and sub-spindle is 0.001°,
providing highly accurate contour machining.
|
|
|
|
|
|
|
 |
Rotary Guide Bushing
The rotary guide bushing in the sliding head design may assure stability, machining accuracy and surface finish, especially when machining long workpieces.
The sliding tool structure features no guide bushing design, which minimizes the material length of residual, and saves machining cost. |
|
|
|
|
 |
The main spindle orientation is equipped with an pneumatic brake
for assuring accuracy in spindle orientation. |
|
|
|
|
|
| Sliding Head & Fixed Head Compound CNC Lathe |
| KS-32 |
 |
| KS-32S |
 |
| |
| KS-32 |
KS-32S |
A. Main Tool Slide
‧The main tool slide can be mounted with 6 O.D.
cutting tools. Size of tool shank is 16 x 16mm.
‧Applicable for turning outside diameter of workpiece
and cutting-off operations. |
A. Main Tool Slide
‧The main tool slide can be mounted with 6 O.D. cutting tools. Size of tool shank is 16x16mm. |
| |
|
B. Rear Side Machining Device
‧The rear side machining device is used with
the
sub-spindle to perform rear side machining on a
workpiece.
‧Capacity of machining device: 4 cutting tools, all can
be fitted with power tools.
‧Machine standard is 2 power tools and 2 fixed tools.
‧Applicable for turining, drilling and tapping operations. |
B. Rear Side Maching Device
‧Capacity of maching device: 8 cutting tools, all can be fitted with power tools.
‧Y2-axis travel / 100mm. |
| |
|
C. Fixed Tool Slide
‧The fixed tool slide is suitable for inside diameter
machining.
‧Applicable for drilling and tapping operations. |
C. Fixed Tool Slide
‧The fixed tool slide is suitable for inside diameter machining. |
| |
|
D. Radial Powered Tool Slide
‧The side milling device is applicable for side milling, drilling
and tapping operations.
‧It can be mounted with 5 cutting tools.
‧All powered tools are driven by a servo motor. |
D. Radial Powered Tool Slide
‧It can be mounted with 5 cutting tools. |
| |
|
E. Front and Rear Machining Powered Tool
Slide(optional)
‧The tool slide is applicable for side milling, drilling
and tapping operations.
‧All powered tools are driven by a servo motor. |
E. Front and Rear Machining Powered Tool Slide(optional)
‧The tool slide is applicable for side milling,drilling and tapping operations. |
| |
|
F. Sub-Spindle
‧The sub-spindle is used with a rear machining device to allow
simultaneous machining on the rear side of a workpiece.
‧It features C-axis function for contour machining.
‧The standard speed of the sub-spindle is 4000 rpm. Upon
request, a 6000 rpm sub-spindle is available(optional). |
F. Sub-spindle
‧It features C-axis function for contour machining.
‧The standard speed of the sub-spindle is 4000rpm. Up on request, a 6000rpm sub-spindle is available(optional) |
| |
|
|
| |
| |
|
|
|
|
|
|
|
|
|
| Standard Equipment / Optional Equipment |
|
Standard Equipment:
‧Main spindle
| Spindle motor |
| C-axis function on main spindle |
| Main spindle brake |
| Sub spindle |
‧Cooling system
| Coolant pump |
| High pressure cooling system 1.5 MPA |
| Coolant tank |
| Coolant level sensor |
‧Automated peripheral equipment
| Parts detector |
|
| Parts catcher |
|
| Parts conveyor |
|
‧Tools
| Model |
KS-32 |
KS-32S |
| Radial powered tools |
5 |
5 |
| Drilling spindle |
ER20 x 2 / ER 16 x 2 |
ER20 x 2 / ER 16 x 2 |
| Rear side machining tools for sub-spindle |
powered tools x 2 / standard tools x 2 |
powered tools x 8
Y2-axis travel / 100mm. |
|
Optional Equipment:
‧Additional powered tools
| Front and rear machining powered tools on 3 axes (1 set) |
| Rear side machining powered tools for sub-spindle |
‧Automated peripheral equipment
| Long parts exhaust device |
Automatic bar feeder |
| Oil mist collector |
Bar feeder interface |
‧Chip evacuating device
| Chip conveyor |
|
| Chip bucket |
|
‧Coolant Flow Detectorr
| The coolant flow detector is applied to detect when the coolant flow volume is inssuffcient. In case the detector is activated, an alarm will be triggered and machine stops automatically. |
|
|
|
| |
|
|
|
|
| |
 |
|
|
|
 |
|
